How To Use A Darning Loom

Some posts hither on ARoseTintedWorld may contain chapter links. This means that if y'all click a link and buy a product or annals, then I may receive a commission at no extra toll to you. I may also use products from the companies mentioned in these posts. Cheers for supporting my blog!

I dearest making sustainable choices when information technology comes to apparel. Fast fashion is polluting the planet, and then I am all for mending and upcycling instead of throwing away. But what happens when you become a hole in a garment? Well I would say mend it. And with this tutorial on how to apply a Speedweve loom today, you can do that too!

Visible mending is very much in fashion. And that is bright equally far every bit I am concerned. I love that there is a trend to show off your clothes sewing mends and show how much you care enough about your clothes to keep them going as long as possible. So read on to see how a Speedweve Darning Loom can help you do just this.

Contents

1. How To Use A Speedweve Darning Loom To Mend Holes In Clothes
   • You Will Need
   • Placing The Warp (Vertical) Threads
   • Placing The Weft (Horizontal) Threads
   • Finishing Off
   • Different Weave Designs When Y'all Become Skilful At How To Utilize A Speedweve Loom

How To Use A Speedweve Darning Loom To Mend Holes In Clothes

A loom is any device that can exist used to weave cloth. The loom itself keeps the warp threads under tension whilst the weft threads can exist placed and interwoven. And the Speedweve or Speed Weve looms are just tiny versions of this.

Back in the 1940s during WWII, cloth was rationed as everything was needed for the war effort. People became very skilful and inventive at 'making do and mending'. A Lancashire company – E&A Chesstok – produced a whole load of tiny looms chosen "SpeedWeve". They were even known equally "Lancashire's Smallest Loom".

You can yet notice vintage models of the Speedweve on auction today. Nevertheless, just recently I have noticed that other sellers accept started selling new editions (similar this i on Etsy) of these miniature looms that were devised for a domestic audience darning and mending holes. I wanted to meet how they worked. And once I tried one I realised just how vivid they are.

Would you lot like to observe out how to utilize a SpeedWeve to mend or darn a hole in your clothes? Then read on!

You Will Need

• A Speed Weve – these come up in a few sizes – I have got several with different numbers of hooks. You merely need to apply the number of hooks that covers the pigsty you are mending.
• two rubberband bands – or sparse bobbles
• Thread or wool for darning.
• A long sharp needle – long plenty to traverse the width of the hole plus a scrap more.
• Scissors
• Good lighting.

The Speedweve can be used with nearly fabrics. I am mending stretch denim, merely you lot can just as easily darn socks, darn a jumper or mend a hole in a cotton shirt.

Popular the wooden disc nether the area of the hole that you need to mend. Centralise the damaged area/pigsty/threadbare area in the heart of the disc. Try not to stretch the hole as much as possible merely go along the area taut. Identify a thin rubberband band or hair elastic to secure the wooden disc if you wish.

Identify the metallic part of the speedweve over the disc into the groove, and secure in identify with an elastic band or pilus elastic. Brand sure that the fabric isn't stretched or puckered. Make certain the fabric is non overstretched, and try to go on the grain of the surface area to be mended in line with the speedweve. You will notice that the directly lines on the fabric in the picture beneath are Non in line, so I rotated the loom and fabric into place.

This has now been lined up.

You can draw a direct line on your garment underneath the hole on the other side of the hole from the hooks of the Speed Weve – this helps to keep the darn swell and tidy.

Set up the hooks on your loom at the top into the primal position, so that the hooks confront straight up.

Placing The Warp (Vertical) Threads

Thread your long needle with a long piece of yarn or thread. Place a stitch on the left finish of your line directly below the hook that y'all will be starting to work on. Pull the thread up and over the showtime claw of the speedweve, then pull the thread back down directly to the line.

Place a second stitch on your garment directly under the second hook of the speedweve. Pull the thread up and claw over the second hook and bring the thread dorsum downward to the line. Stitch the thread to the line directly nether the third claw.

Repeat like this until you become to the last hook that you volition be using. Bring the thread over the hook, dorsum to the line and secure the thread deeply to the garment. Push the hooks at the top to the left using the loops or push machinery on your speed weve. You will notice that this makes the top loops of thread have an upper and lower portion.

Placing The Weft (Horizontal) Threads

Next in this tutorial on how to use a Speedweve loom nosotros need to weave into these warp threads.

Take some other slice of thread and thread your long sharp needle. Starting adjacent to where you lot placed the warp threads place a stitch down at the bottom left of the vertical threads, then weave your needle through all the top loops, going in-between the superlative and bottom portions of each loop.

Pull the thread through all the warp threads, pulling the whole line of weft thread downward to the bottom. place a stitch at the bottom right of the warp threads, securing this layer to the garment.

Motion the hooks to face the right by pushing the mechanism, or in my case moving the metallic loops. This causes the loops of thread at the height to twist the other way. What was the top thread in the last layer is now the bottom thread.

Push the weft needle through all the top loops from correct to left this time. And again bring the resulting thread down to the bottom of the warp threads. Again place a stitch to secure this woven thread layer to the garment, slightly higher up the stitch yous used to start the weft threads. And remember to push the loops back in the other direction at the top.

Repeat this motion time and fourth dimension once again, securing each layer of weft threads with a run up on the garment to the side of the weaving area. Soon information technology will build up into area of threads.

Finishing Off

Remove the elastic ring and advisedly remove the metal part of the speedweve. And yous will be left with some small loops of thread at the elevation of the woven area. Finish off the woven area by attaching these to the garment, individually stitching through each loop to the garment before moving onto the next loop.

And yous have finished!

Every bit you tin see – this means that ultimately you have weaved a tiny rug of threads and secured them to your garment to produce a visible only beautiful mend!

Unlike Weave Designs When Yous Get Good At How To Utilize A Speedweve Loom

If you go take a look on the internet you will find a whole section of the net talking nearly the unlike patterns that you tin produce in the loom, just like yous were making a miniature carpet. Fort at present I will be sticking to a basic weave for my mends. Just it is obvious that this can exist a great new hobby to pursue, as well equally existence a brilliant way to be more sustainable.

See my other way of mending a hole in jeans.

And here are some great ideas for how to make your clothes last longer.

Love this idea on how to use a Speedweve loom? Loathe this thought? I dear to hear your comments. Write to me in the comments below. Or why non detect me on my socials?

Instagram: @ARoseTinted

Facebook: A Rose Tinted World

Twitter: @ARoseTintdWorld

And please exercise pivot this post for afterwards

Source: https://www.arosetintedworld.co.uk/how-to-use-a-speedweve-loom-to-mend-clothes/

Share this post